Rev B
9/1/2021
Page 12 of 17
Attach net:
The outer perimeter of the net is to be fully laced to both the front arch and the base of the frame. See
detail on next page showing how to lace if unfamiliar with lacing. The net will be suspended from the
center two arches by about 6”.
1.
Cut a couple dozen 18” long cords from the roll of 1/8” black cord.
2.
Remove the net and spread it out in front of the cage.
3.
Locate the tags that call out the FRONT CORNERS, FRONT TOP and MIDDLE BACK.
4.
With the frame in the folded position, take the section labeled FRONT TOP and position it in
the center of the top center crossbar. Tie the net to the crossbar using one of the temporary
cords. Tie the leading edge of the net to either side of the frame every couple of feet using
additional cord pieces. Continue tying off the net, working towards the front.
5.
When done verify that the net is truly centered, and the labels LEFT FRONT CORNER and
RIGHT FRONT CORNER are in the proper corners when looking into the cage. If the labels
are reversed it means the net is upside down and the baffle will end up on the wrong side
(outside) of the cage – reverse the net if needed.
6.
Shift the net from side to side as needed to center it.
Содержание BBLD-5000
