6
a.
Assemble support arms to extension arm weldment. Note slots in support arms goes on the extension arm
weldment and holes on the other end goes for the backboard hardware.
STEP 3
Required For This Page: (Optional For Rectangular Backboard)
•
HEX HEAD BOLT
APPROXIMATELY 6” LONG WITH WASHERS, LOCK
WASHERS AND HEX NUT. (SET OF 1)
•
SUPPORT ARMS (SET OF 2)
•
HEX HEAD BOLT APPROXIMATELY 3” LONG WITH TWO WASHERS,
BLACK FENDER WASHER AND LOCK NUT. (SET OF 4)
(Optional For Rectangular Backboard) Note: The Fan Shape Backboard does not require braces.
Backboard and Support arm
Extension arm weldment and Support arm
Two backboards can be assembled on a pole as shown.
