JAYLINE WALLTHERM AIR Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 11

JAYLINE WALLTHERM AIR Скачать руководство пользователя страница 3

NOVEMBER 2016

3

17)

Leave all installation and operating instructions with the owner.

The Satin Black painted flue pipe can be touched up using only STOVE BRIGHT aerosol paint.

   The stainless steel pipe used in the Jayline MKlIl Flue Kit is warranted for five years from date of purchase to the initial
   purchaser, provided these installation instructions and the manufacturer’s instructions on how to operate the appliance
   are met.

16)

Fitting the double flue shield MKIII-Fasten the lower FLUE SHIELD BRACKET to the INNER FLUE SHIELD. Use

the ‘Walltherm AIR’ specification sheet to determine the shield height, above the heater when fitted to the FLUE

SHIELD SPIGOT BRACKET (point 7).

Fasten the top FLUE SHIELD BRACKET assembly as shown.

When completed, the FLUE SHIELD can be removed without using tools, to allow for cleaning of the fire.

Lower Flue Shield Bracket

Top Flue Shield Bracket Assembly

«
1
2
3
4
5
...
»

Содержание WALLTHERM AIR












Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды