JAYLINE UL200, Инструкция по установке и эксплуатации

Страница: 6 / 17

page 6
www.jayline.co.nz JUNE 2018
CORRECT OPERATION OF YOUR UL200 WOOD FIRE
Simply by burning your UL200 fi re correctly, you can improve effi ciency, reduce fuel consumption and
minimise air pollution.
Starting A New Fire
Please note: If lighting the fi re for the fi rst time, dust the fi re, glass, trim and fl ue before fi ring to avoid
particles sticking or discolouring. Once fi red, some smoke and vapour will be released as the VHT painted
surfaces enter the fi nal curing process. Open all windows and doors while running the fi re for up to 5 hours.
People with respiratory, heart or other relevant medical conditions should avoid inhaling vapours during the
curing process. All VHT paint will cure at the highest temperature achieved and will produce smoke again if
this temperature is exceeded.
To start and maintain a good fi re you will need the following items:
1. Approximately 16 pieces of kindling at 1kg in weight total.
2. Intermediate Load #1: 4 pieces of wood approximately 300mm in length at 1.2kg total weight
3.
Intermediate Load#2: 4 pieces of wood approximately 300mm in length weighing approximately
2.5kg in total
4. 4 x Fire Lighter Cubes (supplied) or fi re lighters.
5. 1 x long reach lighter
1 2 3
Kindling and 4 x Fire Lighers
Intermediate Load #1 Intermediate Load #2