JAYLINE UL200, Инструкция для владельца, Страница: 5 / 14

page 5
www.jayline.co.nz MARCH 2021
Lighting Instructions
Once the firelighter cubes have absorbed methylated spirits (2+ hours),
they’ll help give you a quick clean ignition. Remember; always ensure the
firelighter cubes have cooled before removing from the firebox and returning
them to the container of methylated spirits to soak again.
Place the fire lighter cubes at even intervals around the circular
downdraught cylinder.
(Fig 1.)
Stack the kindling in a cross stack manner (Fig 2.)
Light the fire lighters using the long reach lighter then close and
lock the door.
Once the kindling fuel is well-alight (approximately 6-8mins) then the
Intermediate #1 fuel loading can be added on top of the fuel bed.
Again close and lock the door.
After another 6-8 minutes add the Intermediate #2 fuel load.
Close and lock the door.
Ensure fuel is placed into the firebox - never thrown. This will preserve the
life of your components, and avoid your fuel load toppling.
At this time the automatic bypass damper may engage, this will happen
automatically between 14-20 minutes after the fire is started. This is
dependent upon wood condition, heating of the firebox and ambient (room)
temperature.
Once the initial fuel loads have burned down to an ember bed, the main
loads can be applied (approximately 3kg of wood in two pieces).
Apply further fuel as required.
(Fig 3.)
(Fig 1.)
(Fig 2.)
(Fig 3.)