JAYLINE UL200, Инструкция для владельца, Страница: 4 / 14

page 4
www.jayline.co.nz MARCH 2021
CORRECT OPERATION OF YOUR UL200 WOOD FIRE
Simply by burning your UL200 fire correctly, you can improve efficiency, reduce fuel consumption and
minimise air pollution.
Starting A New Fire
Please note: If lighting the fire for the first time, dust the fire, glass, trim and flue before firing to avoid
particles sticking or discolouring. Once fired, some smoke and vapour will be released as the VHT painted
surfaces enter the final curing process. Open all windows and doors while running the fire for up to 5 hours.
People with respiratory, heart or other relevant medical conditions should avoid inhaling vapours during the
curing process. All VHT paint will cure at the highest temperature achieved and will produce smoke again if
this temperature is exceeded.
To start and maintain a good fire you will need the following items:
1. Approximately 16 pieces of kindling at 1kg in weight total.
2.
Intermediate Load #1: 4 pieces of wood approximately 300mm in length at 1.2kg total weight.
3. Intermediate Load#2: 4 pieces of wood approximately 300mm in length weighing approximately
2.5kg in total.
4.
4 x Fire Lighter Cubes (supplied) soak fire lighter cubes in methylated spirits in the plastic container
provided. Keep these away from children and the fire when not in use.
5. 1 x long reach lighter.
Optional accessories recommended but not included: Long reach fire poker, Fireproof mitt/glove to assist
with fuel loading during operation.
1 2 3
Kindling and 4 x Fire Lighers
Intermediate Load #1 Intermediate Load #2