![background image](http://html1.mh-extra.com/html/jayco/hummingbird-2018/hummingbird-2018_owners-manual_3585622075.webp)
Section 5: Slideout Systems
71
Operating the Slideout
The slideout will not function until the stops are properly set or
faults are cleared.
A solid “ON” GREEN LED
indicates room movement.
The RED LED indicates a fault or a problem
with the system.
(Refer to the
Fault Diagnostics / Troubleshooting
).
Prior to moving the slideout room set the parking brake.
To ensure ample voltage is being supplied to the slideout
system motor, power should be supplied from one of the
following sources:
Attach the RV to shore power.
Have the motor home engine running.
Turn on the generator.
Extending/retracting the room:
1.
Engine or generator must be running, or plugged into
shore power.
2.
Transmission must be in park or neutral (if applicable).
3.
Set the parking brake and level the unit.
4.
Remove transit bars (if so equipped) if extending the
room; install if retracting.
5.
Turn
ON
the on/off switch or key.
6.
Press and hold the OUT button (Fig 4). To retract, press
and hold the IN button. There will be a slight delay
before the room begins moving.
7.
The GREEN LED should be solid ON when room is in
motion.
8.
Release the OUT button when the room is fully extended
or the IN button when fully retracted, and stops moving.
9.
Turn
OFF
the on/off switch or key.
Fault Diagnostics / Troubleshooting:
The control has the ability to detect and display several faults. When a fault is detected,
room movement stops and two different LEDs will flash in a pattern.
The RED FAULT CODE LED (Fig 4) will flash a number of times corresponding to a
specific fault code (refer to the Fault Code Chart).
The GREEN ROOM MOVEMENT LED (Fig 4) will flash GREEN a number of times
corresponding to which motor has the associated fault.
Example: (4) RED flashes and (2) GREEN flashes indicate a motor fault on motor 2.
MAJOR and MINOR faults
; faults must be cleared for the room to operate normally.
MINOR
faults can be cleared by pushing and releasing the
IN
or
OUT
buttons on the
wall touchpad (Fig 4).
MAJOR
faults must be cleared by pushing and releasing the SET STOPS/CLEAR
FAULTS button located on the back of the wall touchpad (Fig 2).
Table of Contents
Maintenance Record
Содержание Hummingbird 2018
