Jayco GRANITE RIDGE, Руководство пользователя

Страница: 30 / 134

I
WARNING: For models with a slideout front facing dinette seat, confirm that the tie
down strap is installed correctly prior to travel.
I
CAUTION: IMPORTANT! Never store the slideout without the transit bars installed. This
helps seal the slideout in the closed position.
Overriding the Motorhome Slideout System
The Power Gear slideout system is equipped with a manual crankoverride that allows you to extend
or retract the slideout if there is a loss of power.
If the system will not move when the switch is pressed, checkthe following:
• Is the battery connected?
• Does the battery have a full charge?
• Is the motorhome master battery switch turned "ON"?
• Are the transit bars and tie down strap (if applicable) removed?
After checking the above, follow these steps to move the slideout manually:
1. Rotate the lever on the backside of the motor counter-clockwise about 1/8 turn (Fig. 3-11).
This will release the brake that locks the slideout in place.
2. Access the manual override. For some models it is located in front of the slideout rail
assembly and for other models, it will be found behind the drivers seat.
• For models with the override in front of the slideout rail assembly, using a 3/4" or 1/2"
drive rachet with a 3/4" socket, crank the slideout until it is fully retracted (or extended).
• For models with the override behind the drivers seat, using a 3/4” drive rachet with a
1-1/8” socket, crank the slideout until it is fully retracted (or extended).
3. When the slideout is fully retracted (or extended), apply pressure to the ratchet handle and
return the brake release lever on the motor to its normal downward position (Fig. 3-11). This
will ensure that the slideout is locked in a sealed position.
4.
22 Type C Owner’s Manual
OUTER RAIL ASSEMBLY
MOUNTING BRACKETS
MANUAL
OVERRIDE
MOTOR
ROOM
MOUNTING
KIT
MAIN ROOM SLIDEOUT
INNER RAIL ASSEMBLY
DRIVER’S
SEAT
Fig. 3-10