Jayco Eagle TT 2020, Руководство пользователя

Страница: 92 / 201

Section 6: Electrical System
90
Awning Operation:
Select the AWNING icon; the screen
opens showing the awnings
(Fig 5
). If there are multiple
awnings, there will be a selection for each awning at the left
of the screen. Select the awning you want to control, then
press and hold the EXTEND (B) or RETRACT (C) buttons.
Select the back arrow (A) to return to the previous screen.
Leveler Operation:
Select the LEVELER icon, the screen
opens showing the leveler control panel (
Fig 6
). This
screen will allow you to extend and retract the jacks and to
auto level the RV. Press the AUTO LEVEL button (A) to
begin leveling the RV.
Refer to the Lippert User Guide for the One Control system
for more detailed information. Select the HOME icon to
return to the previous screen.
Slide-out Operation:
Select the SLIDES icon which will
open the slideout screen (
Fig 7
). Slideouts will be num-
bered 1-4 on the touchscreen. The screen can display up
to 4 slideouts. Press Slide 01, and then press (and hold) the
OUT (A) button to extend the slide, or the IN (B) button to
retract it. Repeat this action on the remaining slideouts. Se-
lect the back arrow to return to the device selection screen.
IMPORTANT SAFETY FEATURE
IF SLIDE 01 IS MISSING FROM THE LIST:
This indicates there
is a problem with the bedroom slide-out. In order for the slideout to
function properly, the bedroom door
MUST BE OPEN
. An electronic
door catch has been installed to the wall in the bedroom behind the
door (
Fig 8
). A second piece is mounted to the door (
Fig 9
). If the
door is closed, the Slide 01 notification on the touchscreen display
will disappear and the slide-out will NOT operate. When the bedroom
door is opened and the catch pieces connect, the Slide 01 notification
appears on the touchscreen display and the slide-out can then be oper-
ated normally.
NOTE: This same safety feature applies to the slide-out switch on
the wall or on the Command Center switch panel. The bedroom door
must be open and the catch pieces connected for the bedroom slide
to work.
NOTE: If a device does not appear on your touchscreen then that
particular system is not installed on your RV.