Jayco Eagle TT 2020, Руководство пользователя

Страница: 60 / 201

Section 4: Vehicle Operation
58

Standard Mode and Menu

Basic Jack operation

Unhitching Instructions

Auto Leveling
Linc Remote Control
Configuring the remote to sync with the OneControl Touch panel:

Press the chrome button on the bottom of the remote to turn
it on. Enter the PIN (default is 0,0,0,0). The PIN can be
changed after entering the default PIN. A menu will appear,
choose Leveler from that menu.

Turn the OneControl Touch Panel ON inside the RV.

At the top of the Touch Panel screen press the “CONNECT-
ED” icon quickly 6 times.

A GEAR icon will appear at the top of the screen that says
“OPTIONS”. Press this GEAR icon.Screen display chang-
es to “
Select Operation
” with arrows on the left side of
the screen. Use to arrows on left side of screen. Scroll to
“WIRELESS CONFIG”.

Press the ENTER button at the bottom of the screen.

The screen will display
“Wireless Configura-
tion Press any Linc button to sync”
.

Press any button on the remote control while
in Leveler mode and the remote will be con-
nected.
Pressing the ABORT button on the touch screen will can-
cel the configuration sequence.
The following functions can be operated using the Linc
Remote Control. Refer to the Lippert Ground Control 3.0
manual for complete instructions.

Basic Jack operation

Unhitching Instructions

Auto Leveling
Troubleshooting
Refer to the Lippert Ground Control 3.0 manual for trou-
bleshooting information which includes the following:

OneControl Touch Panel Error Codes

Special Jack Error Codes on the OneControl
Touch Panel

How to manually override the jack motor

Setting Zero Point Calibration

Zero point is the programmed point that the
RVwill return to each time the Auto Level feature is used. Zero Point is only
available on the OneControl Touch Panel.

Preventative Maintenance tips
OneControl Touch Panel
Linc Remote