![background image](http://html1.mh-extra.com/html/jayco/eagle-264-bh/eagle-264-bh_owners-manual_3680288082.webp)
71
AUTOMATIC MODE OPERATION
When you select AUTO mode, the refrigerator controls automatically select the most
efficient energy source that is available for operation. If a more efficient energy source
becomes available, the refrigerator controls change from the current energy source to the
more efficient energy source.
If an energy source is available to the refrigerator, but is not operating correctly: A fault
code appears in the center display. The refrigerator controls try to change to a less
efficient energy source. If a less efficient energy source is not available, the refrigerator
stops operation. Refer to the “Fault Codes” in the manufacturer’s owner’s manual.
MANUAL MODE OPERATION
When you select one of the manual modes of operation, the light bar beside the AUTO
goes out in the center display and only the light bar beside either AC, LP, or DC remains.
AC means that the refrigerator is operating on AC electric. LP means that the refrigerator
is operating on LP gas. If the energy source is interrupted, the refrigerator stops
operation. Refer to the “Fault Codes” in the manufacturer’s owner’s manual.
IGNITION OF LP GAS IN EITHER AUTO OR MANUAL MODE
Note: On initial startup of the refrigerator, ignition of the LP gas may not occur within 30
seconds.
If ignition of the LP gas does not occur with 30 seconds, the gas safety valve of the
refrigerator closes, and the refrigerator stops operation. Refer to the “Fault Codes” in the
manufacturer’s owner’s manual. The fault code remains until you push the ON/OFF
button two times (to stop and start the refrigerator). If ignition does not occur after two or
three times, check the LP gas supply line; consult your local dealer or an authorized
Norcold Serivice Center; change to manual mode and operate on AC electric.
Operating the Refrigerator Controls – N841
CONTROL PANEL
Fig. 5-10
The refrigerator control panel is between the freezer compartment and the fresh food
compartment. To maintain the operating control functions of the refrigerator, a 12 volt
DC power supply is necessary. The refrigerator and any other DC components in the
vehicle receive DC power from the 12 volt system of the vehicle; either an auxillary
battery, a converter, or the vehicle engine battery.
Содержание Eagle 264 BH
