Jayco 2009 Recon ZX, Руководство пользователя

Страница: 73 / 100

SECTION 11
CAMPING & OPERATING
69
must be level for proper operation. The
appliances perform best when level.
K
EYS
Several keys are provided when you
purchase your RV. Most keys have an
individual key number stamped on the plate.
Record these key numbers and keep the
information in safe place. You can order a key
blank from your RV dealer to have duplicate
keys made. If you lose the keys, contact your
RV dealer or a locksmith for assistance.
Make sure the keys are not inside the RV
before you close and lock the entrance
door.
E
NTRANCE
D
OOR
W
ITH
S
CREEN
D
OOR
The entrance door is located on the curbside
of the RV. Always hold onto the entrance door
when opening or closing it as damage caused
because you failed to do so is not
warrantable.
BE SAFE, LOOK BEFORE ENTERING OR
EXITING YOUR RV!
H
IDE
-A-B
ED
(
IF SO EQUIPPED
)
The hide-a-bed sofa functions much the same
as a regular residential hide-a-bed sofa. To
make the hide-a-bed sofa into a bed, remove
the seat cushions and pull the strap located at
the front of the sofa seat bottom out towards
you firmly and gently.
To convert the hide-a-bed back into the
upright sofa position, reverse the process
(make sure to pull the seat belts out into their
usable positions). Be sure to hold the sofa
strap firmly to ensure the hide-a-bed sofa
does not suddenly drop shut. Refer to the
furniture manufacturer’s care instructions for
this product.
B
OOTH
D
INETTE
The dinette is designed to seat up to four
adults. You can access the dinette bench
storage by removing all the cushions and
lifting the bottom seat supports.
If the dinette bottom seat support is screwed
shut, it is to protect factory-installed
equipment (do not use that area for storage).
To convert the booth dinette into a sleeping
area:
□ Remove all the cushions from the booth
dinette.
□ Lift the tabletop, remove the detachable
table legs and place the tabletop on the
ledges provided between the booth
dinette benches.
□ Lay the seat back cushions against the
back of the booth dinette bench.
□ Lay the dinette seat bottom cushions in
between the seat back cushions. The area
where the cushions meet should be
slightly raised.
□ Push the raised cushion ends down
gently. The cushions are designed to fit
snugly.
Reverse this process when converting back to
the booth dinette.
U-shaped dinette (if so equipped)
The dinette ends pull out to provide storage.
To convert the u-shaped dinette into a
sleeping area, install and secure the bed
insert.
Make sure the entrance door is completely
closed and locked when traveling. Locking
the door helps prevent it from opening
unintentionally.
Fig. 11.2
U-shaped
Dinette bed
insert