Instructions:
- Please check the mains specification before plugging into the socket.
- Plug the power adaptor into the DC input socket, and then plug the
adaptor into the wall socket. The clock digits will flash to indicate it is
working properly.
Clock backup:
Insert 3 x AAA batteries into the battery compartment of the clock. This
function prevents the clock time from being lost when power has been lost by
the unit. The display will not show in this instance but the battery will keep the
clock IC running until the power is restored.
Remote control:
Insert 2 x AA batteries into the battery compartment of the remote control.
Using the clock:
Setting alarm 1:
- Press the ‘MODE’ button to enter the alarm 1 setting mode. The hour digit
and the AL1 indicator will flash, and then press the ‘UP’ or ‘DOWN’ button
to adjust the hour.
- Press the ‘MODE’ button again to toggle to adjust the minute. The minute
digit will flash, and then press the ‘UP’ or ‘DOWN’ button to adjust the
minute.
Setting alarm 2:
- Follow from above; press the ‘MODE’ button to enter the alarm 2 setting
mode. The hour digit and the AL2 indicator will flash, and then press the
‘UP’ or ‘DOWN’ button to adjust the hour.
- Press the ‘MODE’ button again to toggle to adjust the minute. The minute
digit will flash, and then press the ‘UP’ or ‘DOWN’ button to adjust the
minute.
Setting the hour format (12H or 24H):
- Follow from above; press the ‘MODE’ button to enter the hour format
setting mode. The display will show “12H” or “24H”, and then press the
‘UP’ button to toggle between “12H” for 12 hour format and “24H” for 24
hour format.
Setting the time:
- Follow from above; press the ‘MODE’ button to enter the TIME setting
mode. The hour digit will flash, and then press the ‘UP’ or ‘DOWN’ button
to adjust the hour.
- Follow from above; press the ‘MODE’ button to enter the minute setting
mode. The minute digit will flash, and then press the ‘UP’ or ‘DOWN’
button to adjust the minute.
Setting the year:
- Follow from above; press the ‘MODE’ button to enter the year setting
mode. The year digit will flash, and then press the ‘UP’ or ‘DOWN’ button
to adjust the year.
Setting the Date Format (D-M or M-D):
- Follow from above; press the ‘MODE’ button to enter to enter the date
format setting mode. The display will flash ‘nn dd’ or ‘dd nn’, and then
press the ‘UP’ or ‘DOWN’ button to adjust the date format.
nn = month, dd = day.
