www.procontechnology.com.au
Phone: (03) 98306288
HOLD/BACKLIGHT button
The HOLD button holds the current display reading until
momentarily pressed again. Press and hold this button
for more than 2 seconds to turn the backlight on. Press
again for more than 2 seconds to turn off the backlight.
RANGE button
When the function switch is operated, the meter
automatically starts operating in Auto Ranging mode.
This selects the best range for the measurement being
made and is generally the best mode for most manual
measurements. For data logging measurements or when
required, the range may be manually selected, as
follows:
1. Press the RANGE button. The "AUTO" indicator on
the display will turn off.
2. Press the RANGE button to step through the
available ranges until the required range is selected.
3. Press and hold the RANGE button for more than 2
seconds to revert back to "AUTO" operation.
