Jaycar QM1571 Скачать руководство пользователя страница 23

Страница: 23 / 24

www.procontechnology.com.au

Phone: (03) 98306288

BATTERY INSTALLATION

WARNING:

To avoid electric shock, disconnect the

test leads from any source of voltage before removing

the battery cover.

1) Disconnect the test leads from the meter.

2) Open the battery cover by removing the two central

screws using a Phillips head screwdriver.

3) Remove the cover and insert the battery into battery

compartment, observing the correct polarity.

4) Put the battery cover back in place. Secure with the

two screws.

NOTE:

If your meter does not work properly, check the

fuses and the battery to ensure that they are still good

and that they are properly inserted.

REPLACING THE FUSES

WARNING:

To avoid electric shock, disconnect the

test leads from any source of voltage before removing

the battery cover or opening the meter.

1) Disconnect the test leads from the meter and any

item under test.

2. Remove the battery cover and battery by removing the

Содержание QM1571

























Результаты поиска

Содержание QM1571

Отзывы:

Похожие инструкции для QM1571

Бренды по названию

Популярные бренды

Jaycar QM1571, Руководство по эксплуатации

Результаты поиска

Содержание QM1571

Отзывы:

Похожие инструкции для QM1571

Бренды по названию

Популярные бренды