Powering the Transmitter Cradle Using Batteries
The transmitter cradle battery compartment is located on the bottom.
1. Remove any cable connections and turn the transmitter cradle upside
down, holding it in your hand.
2. Open the battery compartment by sliding the lock of the compartment
cover into the direction of the compartment. The cover can be opened
and then removed.
3. Insert three AAA batteries into the battery compartment. Note the + and
– icons on the batteries and inside the battery compartment.
4. Place the battery compartment cover over the battery compartment so
that the locking nose of the cover is inserted into the corresponding notch
on the transmitter cradle. Then close the battery compartment cover until
it locks in place.
While the transmitter cradle is on battery power, it will not
charge the built-in headphone battery.
If you have inserted batteries into the transmitter cradle and you
connect the power adapter to the power socket (12), battery operation will
be disabled automatically. This helps you to save battery power
whenever the device is connected to the mains via the power adapter.
