Using the Headphones with a Cable
If your location is close to the audio source and you don’t wish to make
portable use of your headphones, you may use them with a normal cable
connection. In this case you don’t need the wireless capabilities of the
transmitter cradle.
For cable operation, use one of the supplied audio cables (see page 1 –
Package Contents).
1. Music output via the audio cable is possible while the headphones are
powered off. To save battery power, press the On/Off button (10) to
power the headphones off.
2. Connect one end of the audio cable to the audio input socket (6) of your
headphones. Connect the other end of the cable to the headphones output
socket of your hi-fi equipment.
If your hi-fi equipment has a 6.3 mm stereo socket, connect the adapter
plug (see page 1 – Package Contents) to the cable. You may also
connect the adapter cable (see page 1 – Package Contents) to the
cable to use any of the Cinch audio outputs of your hi-fi equipment.
With this type of connection, the headphones work as a
passive device. The volume can therefore only be adjusted on the
audio source.
Switching to radio reception is not possible during cable
operation. If you want to listen to radio stations, you must first
disconnect the connection cable from the audio input socket (6) of
your headphones.
