Key layout of IR remote control is shown below.
IR remote control battery replacement:
1. Remove the Battery Holder by pressing the retaining clip side-
ways (1) and pulling the holder out (2) (see diagram at right);
2. Note the orientation of the old battery before removing it from the
Battery Holder;
3. Remove old battery and replace with a new 3-volt lithium
CR2025 battery in the same orientation as the old battery;
4. Reinsert the Battery Holder into the slot in the bottom of the
Remote Control until it locks into place.
B. PHOTO MODE
•
Press [
ENTER
] button to enter photo viewer mode
•
Press [
ENTER
] button to view full screen photo
•
Press [
] button to begin a four-image slide show
1
2
~ 2 ~
