7. Eliminate the iron and the medium conductivity metals at the
same time
Operate
Indicatio
n tone
LCD
TARGET
ID
LCD
DEPTH-
SENS
Chart
Note
Press
MODE
button
It
responds
with
low,
medium
tone
alternate
ly,and
repeats
three
times
IRON
、
MID
RANGE
is
illuminated
at the same
time
SENS-3
is illuminated
Nickel,
Coins
Silent
IRON
、
MID
RANGE
flicker
sonce
SENS-3
flickers once
Silver
A high
tone
SILVER
is
illuminated
and flickers
DEPTH-2
is illuminated
and flickers
Pres the
MODE
button
again,it
comes
back to
ALL
METAL
mode
Operating the detector outdoors
1.Turn on
Press the “power on” button, the cursors on the LCD screen will be illuminated
one by one, and the detector will sound the three frequency tone of low,medium and
high, the detector is now ready. It’s the Initial State
：
TARGET ID cursor is not lit,which means it’s in the ALL METAL state.
DEPTH-SENS 3 segments are lit,which means the sensitivity is at the third level.
2.Choose the sensitivity
Press the “SENSTIVITY ” “+”or “-” button, you can regulate the sensitivity.
Generally speaking,we set it to the highest level,if there is much electromagnetic
interference around or the soil is highly mineralized, the detector will have an erratic
tone, and if this happens, you should reduce the detector’s sensitivity.
10
