Jaycar Electronics LA-9011, Руководство пользователя

Страница: 11 / 16

will make the cut relay back to the connection state, and then the car engine will be turned on.
Also you can Send SMS “STOPENGINE*123456” to tracker, “STOPENGINE” is a command, “123456” is
password, the car engine will be turned off immediately. The tracker will send back the information “Car Engine
turn off” if the password is not right, the tracker will send back information “Wrong Password”.
Note: Turning off the engine is very dangerous when the car is moving, this will make the car
difficult to control and maybe cause an accident. It is recommended to connect the relay cut the
start motor wire, ensure the car’s engine can not be started again.
A relay is needed to be installed in order to turn off the car engine, also a diode is necessary to protect the tracker
driving wire.
The diagram is as follows:
InstructionDescription
The tracker ID is printed on the label of the tracker, the S/N number on the label is also the ID number. If the label
is missing, send an SMS “ID*123456” to tracker, in which, “ID” is the fixed command and “123456”is the password.
Having successfully been made, there will be a SMS “ID: CW0800C12345678901”, in which,
“CW0800C12345678901” is the ID and every tracker corresponds to the only number. This number is used to
differentiate the tracking uploaded to the website from others.
The last 6 digit number of the tracker ID is the user name and password of the tracker on the platform, for example
the tracker ID is : CW0800C12345678901, and then the user name on the platform of this tracker is : 67890. The
platform password for this user name also is 678901, the user can then login to the platform for changing the
password.