Manual
MI
C I
N
LIN
E I
N
BAL
VOL
TONE
ON
OFF
TONE
TONE
TONE
BAL
BAL
VOL
BAL
MI
C I
N
LIN
E I
N
BAL
VOL
TONE
ON
OFF
L
R
L
R
(5)Frequency response: Rotate the
TONE
in the best position, make
sure you can hear the TV sound clearly.
“
”
(6)Balance adjustment: If the hearing ability of two ears is not the same,
you can use screwdriver to adjust the BAL, make sure the volume meets
your requirement.
b. The infrared window of the transmitter should face the receiver.
Noise will occur when run into the below situations:
a. There is some obstacle between the transmitter and the receiver.
b. The receiver is too far away from the transmitter, or deviation
angle is too large.
M
IC
IN
' ( )
* ( )
! " #
X
Manual
(3) After make sure the transmitter and audio cables are connected well,
switch on the transmitter, the power indicator will be on, this means the
transmitter is working. Face the transmitter's IR window to the receiving
area. Adjust the audio source in working status and turn up its volume
properly (when transmitter connects to STB, DVD, PC, etc)
(4)Make sure the receiver's IR window faces toward the transmitter,
switch on the receiver, its power indicator will be on, then you will hear
the sound from transmitter, adjust the volume properly, if the volume is
not loud enough, please turn the volume of audio source louder until the
volume meets your requirement.
Audio out
Connect to audio out of DVD
Connect to audio out of PC
Infrared
window
Note: Because this product adopts infrared wireless technology, when
you ensure that you have connected the parts well, please note as below:
a.Transmitter should be put on the higher place, like the top of TV.
Содержание AA2079
Страница 1: ...TV Hearing Aid Earphones Manual...
