Jay GS, Руководство пользователя

Страница: 10 / 88

Jay GS
EU=Rev.12.0
10
MAINTENANCE/CLEANING
ENGLISH
CLEANING THE FOAM BASE / LEG SUPPORT WEDGES
Remove the covers and fluid pad from the foam base.
The foam base may be disinfected using immersion or spray
disinfectant, (see chart opposite). Wipe off with a clean
cloth. Let it completely air-dry before reassembly.
CAUTION
Avoid submersion of the foam base in water.
CLEANING THE FLUID PAD
Remove the outer cover from the cushion. Remove fluid pad
from the inner cover. The fluid pad may be disinfected using
spray disinfectant, (see chart opposite). Rinse with a clean,
damp cloth, then wipe dry with a clean cloth.
CAUTION
• Never submerge the fluid pad in bleach.
• Avoid harsh cleaning or rough handling as this may lead
to a degradation of the fluid insert and lead to a leakage.
Should there be evidence of wear and tear on the cover,
foam insert, fluid insert or other parts or if you notice that the
consistency has deteriorated, please contact your dealer or
Sunrise Medical for an assessment and further instructions.
EASY MAINTENANCE & CLEANING
• Monthly cleaning and regular maintenance may help
extend the life of your cushion. During cleaning,
component inspection is recommended.
• Check the cover for tears and excessive wear and
replace if ripped, torn or otherwise not fully functional.
Inspect the fluid pad for punctures or any other
abnormalities.
• Check the base to ensure any accessories are still in
the right position.
• Check the foam inserts to ensure foam consistency.
• While checking the fluid pad if you ever feel the fluid
is firmer in one area, simply knead the fluid back to its
original consistency and/or call your supplier.
• An incontinence resistant cover will help reduce the
frequancy of cleaning.
TO CHECK AND CLEAN THE COVER
• Remove the cover from the foam insert and turn inside
out.
• Machine wash in warm water (maximum recommended
temperature is 70° for microclimatic and stretch covers,
60°C for incontinent covers) and air dry.
• No ironing required.
CAUTION
• Do not dry clean covers or use industrial washers and
dryers to clean cover.
• Do not steam autoclave.
• Do not bleach.
• To refit cover after washing, reinstall the cover on the
foam insert. Ensure the back of the cover matches up
to the back of the foam insert.
• If used in an institutional setting, write the resident’s
name with a permanent marker on the content label
of the covers. This will help to ensure the return of the
covers after washing.
• Use only JAY covers on JAY cushions. The cover is an
important part of allowing the immersion into the fluid
insert which redistributes the pressure. Changing the
cover will alter this design and its efficacy.
LAUNDRY CARE SYMBOLS
Machine wash in warm water
(70° C)
Only non-chlorine bleach,
when needed
Drip dry
Do not iron
Do not dry clean