Jay-tech PF07, Руководство пользователя

Страница: 25 / 26

22
9. Cleaning & Maintenance
Clean the film scanner periodically after use. The film scanner
should be cleaned using a compressed air canister to remove the
dust from the internal chamber.
1.Insert the end of straw from the compressed air into the door flap
on the right side so that it opens.
2.Gently blow out any dust on the inside of the device.
Note: The compressed air canister is not included with the device
but it can be purchased from an office supply or electronics retailer.
For further cleaning you can use an ordinary cotton swab and a
bottle of lens cleaning fluid.
3.Wet the end of the cotton swab with Lens Cleaning Fluid and insert
into the right side of the device so the door flap opens. Then clean
the entire surface of the glass on the inside of the device with the
cotton swab.
Note: Cotton swabs and cleaning fluid are not included with the
device but can be purchased from an office supply, photo supply or
electronics retailer.
When not in use please disconnect the film scanner from the
computer and store in a clean, dry and dust-free place.