2
Protection of Power Cable
1. To disconnect the AC power cord, pull the plug out from the connector.
2. Please do not place the AC power cord close to any heat source.
3. Please do not place heavy objects on the AC power cord.
4. Please do not disassemble and repair the AC power cord by yourself.
5. This player is a class-I laser product and with a
“Class-I” remark.
6. This product contains a low-power laser device. In case service or
internal-component adjustment is needed, please contact nearby distributors and
seek professional technical help.
Precautions and Maintenance
1. Please do not place the device in a sealed container to protect it from high
temperature.
2. Please do not place the device under direct sunlight or close to any heat sources.
3. Please do not place the device close to objects with magnetic field.
4. Please do not place the device near liquids. If liquid penetrates the device, please
remove the plug immediately and seek technical assistance.
5. Please place the device on a horizontal surface, and do not place heavy objects on
top of the device.
6. Please use standby mode when play is suspended. Please remove the AC power
cord or lithium battery if the DVD player will not be used for a long time.
7. Please do not put your fingers or other objects into the device.
8. The disk-drive read header will form condensation under the following conditions:
(1) The device has been open for a long time.
(2) In a room with steam or damp.
(3) Moving the device from a low to a high temperature environment.
9. In order to prevent fire, electrical shock, or device damage, do not use cleaning
fluid or spray.
10. There might be interference on the screen if you watch TV and the DVD is still
playing due to different TV types. For better image quality, please turn off the DVD
when you watch TV.
11. Please do not repair this DVD player by yourself.
12. The image quality might be reduced if there is muddiness or scratches on the LCD
screen.
