Jay-tech 9903, Руководство пользователя

Страница: 11 / 31

Browse files in SD card:
Open “My Pad” and select “SD”; browse the content of files after opening.
Pull out SD card:
Close all files opened in the card and select MENU>Setting>SD card and
storage device (SD card).
Click to remove SD card. The system prompts that “SD card is safely
removed”. Press the card slightly and section of the card will be popped.
The prompt on the top left corner of the screen reads “SD card is removed.”
NOTES:
•
The position to insert the card should be right. Otherwise, the card
will be damaged.
•
Don’t pull out SD card forcedly before “removal of SD card” is
displayed. Otherwise, the card may be damaged.
•
If SD card is write-protected, it cannot be formatted or written with
data. Such operation should be conducted after write-protect is
canceled.
•
Suggest using main brand SD card to avoid incompatibility.
3.3 Switch On and Off the Device
Switch on : the power switch can be pressed directly to switch on the device
if the electricity of battery is sufficient.
Switch off : a long press on power button enables the system to pop out the
equipment selection dialogue box and select switch off. The system will pop
out the switching-off confirmation box again and select the confirmation to
switch off.
3.4 Network Connection
Cable Network:
Insert the network cable into the network port. Netbook obtains the IP
address to connect network through DHCP automatically.
In addition to obtaining IP address to connect the network automatically,
manual confirmation for IP address is also allowed.
10