AAA-055-00188
Jaylor Owner Manual
-32-
5000 Series Truck Mount Models
19.5.2 Entangled Material
Twine, string, and wrapping material that is not removed from bales can get tangled on the auger or under
the auger. If this material is not removed from the auger, it can cause damage to mixer components as
well as decreased mixing and cutting ability. Due to the severe consequences that having entangled
material can cause, action to remedy this should be taken as soon as it is noticed. To remove the material
the door must be secured in an open position with a pair of locking pliers locked just below the door to
the drum wall. Once the mixer door is secured in the open position and the auger is fully stopped with
the truck off and parked the mixer can be entered to remove the material.
DANGER:
Never enter the mixing chamber or go on the conveyor unless all controls are in neutral,
engine stopped, park brake set, ignition key removed and all moving parts have stopped. Failure to
follow these safety precautions can result in serious injury or death.
CAUTION:
When in the mixing chamber take care not to come in contact with knives. Contact with
a knife could result in a deep laceration and severe hemorrhaging.