JAXJOX JJ15000, Руководство пользователя

Страница: 13 / 18

13
Kettlebell weight is not adjusting.
• Ensure the shell is properly seated before adjusting the weight. The unit will
beep once when properly seated.
• Verify the weights are stacked correctly, in the right order. Following the
instructions in the “Assembly” section.
• The weight of the kettlebell shell may be misaligned with the weight on
the base. Follow the instructions below in the “Shell and base weight
misalignment.” section.
KettlebellConnect 2.0 does not beep when the shell is reseated.
• When reseating the shell, ensure it is aligned correctly with the base. The
handles should align with the wings on the base.
• Ensure the shell is properly seated. It should sit fully against the base,
without space in between.
• Verify the weights are stacked in the right order. Follow the instructions in the
“Assembly” section.
• The weight of the shell may be misaligned with the weight on the base.
Follow the instructions below in the “Shell and base weight misalignment.”
section.
Shell and base weight misalignment.
• Remove the shell from the base.
• Press and hold the [+] and [-] buttons together
for 5 seconds, or until you see a “0” displayed
on the screen.
• Adjust the display number to the number of
weights on the base. Example: If there are
3 weights on the base, then set the display
number to 3.
• Reseat the shell on the base. When the unit
beeps, and weight can be changed properly,
the shell and base have been realigned.