2. MEASUREMENT
Check the voltage and turn the power on
With the switch-on, a music sound flows as the
LED screen is activated
But, the SOUND ON/OFF switch in the rear of the
unit should be set as ON
For the card users, proceed with checking after
entering the card into the card-reader.
When the card is inserted, a voice message
comes out to “press the start button”
Put your right or left arm into the cuff
deeply. For FT-500R, measure with right
arm, for FT-500L, measure with left arm.
Note
the CARD ON/OFF switch in the rear of the unit should be set as ON
if the card is damaged or expired, the voice message comes out as “Can not use ID
card.” In this case, purchase new one and try again.
Note
An optimal arm circumferance for this equipment is 9 to 14
FT-500L
FT-500R
