JAWA Dandy MJ50, Руководство по эксплуатации и обслуживанию

Страница: 28 / 32

8.27. Lamp Replacement
Front Headlight
Type:
bonneted design
Check and / or replace the lamps in the following way:
Dismantle the rear protective cover of the headlight, release the securing spring, and remove the lamp
closure.
Dismantle the lamps of the main headlight and clearance light and check them. Replace them, if need
be.
Lamp type: Main headlight: 12V 35/35W Clearance light: 12V 5W
Mounting is carried out in the reverse order.
Type:
Classic
Check and / or replace the lamps in the following way:
Release the fastening screw and dismantle the front cover of the headlight.
Release the securing spring, dismantle the lamp closure, and remove the lamp. Check the lamp and
replace it, if need be.
Lamp type: Symmetric 12V 35/35 W
Mounting is carried out in the reverse order.
Rear Group Lamp
Check and/or replace the lamps in the following way:
Dismantle 2 fastening screws of the rear group lamp cover, and take out the cover.
Dismantle the clearance light and stop light lamps. Check the lamps, and replace them, if need be.
Lamp type: 12V/ 5W (clearance light) 12V/10W (stop light)
Mounting is carried out in the reverse order.
Drive Direction Indicators
Check and/or replace the lamps in the following way:
Dismantle fastening screw of the direction light cover, and take out the cover.
Dismantle the lamp, check it, and replace it in case of need. Lamp type: 12V R1OW
Mounting is carried out in the reverse order.
In case that after replacement of a failed lamp by a new one the latter is again damaged, contact the special
service immediately.
8.28. Fuse Replacement
The electric installation fuse is accessible after unlocking and lifting the double-seat up.
Withdraw the ignition and check if the fuse is not blown. If yes, replace it by a new one.
Fuse type: knife 7.5 A
WARNING!
Use only the fuses of prescribed value. If you use a fuse with higher amperage, there could be a damage to the
electric installation, or a fire.
27