User Manual Javo Rotofill
Version 2014-1-2
14
5.10
Set substrate slide height
The substrate slide is placed after the compactor. The substrate slide has the
function to shift the excess of substrate off the tray.
Set the position of the substrate slide before you start working with the
machine.
Procedure:
1.
Check the height of the substrate slide with respect to the tray. The slide
should be placed approximately 15mm above the tray.
2.
If the height is incorrect:
a.
Loosen wing nut (A).
b.
Set the substrate slide to the desired height.
c.
Tighten wing nut (A).
5.11
Set brush height
Set the brush height before you start working with the machine.
Procedure:
1.
Check the height of the brush with respect to the tray. The slide should
be placed approximately 5mm above the tray. The brush is intended to
evenly level the substrate in the tray.
2.
If the height is incorrect:
a.
Loosen clamp (A).
b.
Set the desired height using crank (B).
c.
Tighten clamp(A).
5.12
Set speed tray conveyor and ground retour chain
The tray conveyor and ground retour chain is driven by one electric motor. Both
drive ratios are 1 to 1, which means that the speed of the tray conveyor and the
substrate retour chain is the same.
Set the tray conveyor and ground retour chain speed before you start
working with the machine.
Procedure:
1.
Check the speed of the tray conveyor and substrate retour chain.
2.
Set the desired speed by turning Vario clutch (A) to the left or right.
