Javad Maxor, Руководство пользователя

Страница: 93 / 142

www.javad.com Maxor User’s Manual 4-5
O P E R A T I O N
Using MinPad
Battery LED
The color of the BATT LED indicates the level of internal battery charge in the
Maxor:
• Green – indicates greater than 90% charge.
• Orange – indicates an intermediate charge.
• Red – indicates less than 10% charge.
When data recording is ON, and the FN key is...
Not pressed
Red No free memory; hardware problem
with data recording.
If FN key mode is «LED blink mode switch»
Green Data recording started (post-
processing occupation mode
undefined).
If FN key mode is «Occupation mode switch»
Green Data recording started (Kinematic
post-processing occupation mode).
Orange Data recording started (Static post-
processing occupation mode).
Pressed for < 1
second
If FN key mode is «LED blink mode switch»
Orange Release to change information mode.
If FN key mode is «Occupation mode switch»
Orange Release to toggle between Static and
Kinematic post-processing modes.
Pressed for 1–5 No light Release to stop data recording.
Pressed for 5–8
seconds Red Release to turn serial port A baud rate
to 9600 bps.
Pressed for > 8
seconds No light No function (data recording still on).
Table 4-1. FN Key Functions and REC LED Status (Continued)
FN Key REC LED Status