Javad Maxor, Руководство оператора

Страница: 123 / 164

www.javad.com Maxor Operator’s Manual 4-25
O P E R A T I O N
Loading New Firmware
Notice: If you selected an incorrect RAM or Flash file, an error
message displays at the bottom of the dialog box.
Reselect the correct file.
6. Select the Device tab and set the Device Type as Receiver's Power
Board (Figure 4-17).
Figure 4-17. Set Device Type
7. Click Get from Device for device information (Figure 4-17).
8. Select the Program tab and set the Capture Method to Soft Break
Capture (recommended) (Figure 4-18).
Figure 4-18. Program Tab Settings
9. Browse for and select the Power board's RAM file (Figure 4-18).
10. Click Load and wait until 100% of the power board file loads into your
receiver.