background image

4                                                                                                                                                                                                                                                                        

www.javad.com

Confidential Information with a degree of care no less stringent that the 

degree of care you would use in safeguarding your own most valuable 

trade secrets. Nothing in this paragraph shall restrict you from disclos-

ing Confidential Information to your employees as may be necessary 

or appropriate to operate or care for HPT435BT JL. Such employees 

must also keep the Confidentiality Information confidential. In the 

event you become legally compelled to disclose any of the Confidential 

Information, you shall give JAVAD GNSS immediate notice so that it may 

seek a protective order or other appropriate remedy.
WEBSITE; OTHER STATEMENTS – No statement contained at the JAVAD 

GNSS website (or any other website) or in any other advertisements or 

JAVAD GNSS literature or made by an employee or independent con-

tractor of JAVAD GNSS modifies these Terms and Conditions (including 

the Software license, warranty and limitation of liability).
SAFETY – Improper use of HPT435BT JL can lead to injury to persons or 

property and/or malfunction of the product. The HPT435BT JL modem 

should only be repaired by authorized JAVAD GNSS warranty service 

centers. Users should review and heed the safety warnings in Appendix 

C.
MISCELLANEOUS – The above Terms and Conditions may be amended, 

modified, superseded, or canceled, at any time by JAVAD GNSS. The 

above Terms and Conditions will be governed by, and construed in ac-

cordance with, the laws of the State of California, without reference to 

conflict of laws.

REGULATORY INFORMATION

A license may be required for operation.

FCC Class A Compliance

This equipment has been tested and found to comply with the limits for 

a Class A digital device, pursuant to part 15 of the FCC Rules. These lim-

its are designed to provide reasonable protection against harmful inter-

ference when the equipment is operated in a commercial environment. 

This equipment generates, uses, and can radiate radio frequency energy 

and, if not installed and used in accordance with the instruction manu-

al, may cause harmful interference to radio communications. Operation 

of this equipment in a residential area is likely to cause harmful interfer-

ence in which case the user will be required to correct the interference 

at his own expense.

CAUTION: Any changes or modifications to the equipment not expressly approved 

by the party responsible for compliance could void your authority to operate such 

equipment.

Canadian Emissions Labeling Requirements

This Class A digital apparatus meets all requirements of the Canadian 

Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du 

Réglement sur le matériel brouilleur du Canada.

Industry Canada

The term “IC:” before the equipment certification number only signifies 

that the Industry Canada technical specifications were met.

WEEE DIRECTIVE

The following information is for EU-member states only: The use of the 

symbol indicates that this product may not be treated as household 

waste. By ensuring this product is disposed of correctly, you will help 

prevent potential negative consequences for the environment and hu-

man health, which could otherwise be caused by inappropriate waste 

handling of this product. For more detailed information about the take-

back and recycling of this product, please contact your supplier where 

you purchased the product or consult.

Содержание HPT435BT JL




















Отзывы: