Javad HPT102 Скачать руководство пользователя | Manualshive

Страница: 7 / 46

background image

7

www.javad.com

P

REFACE

Thank you for purchasing this product. The materials available in this Manual (the “Manual”)
have been prepared by JAVAD GNSS, Inc. (“JAVAD GNSS”) for owners of JAVAD GNSS
products. It is designed to assist owners with the use of HPT102 and its use is subject to these
terms and conditions (the “Terms and Conditions”).

Note:

Please read these Terms and Conditions carefully.

Terms and Conditions

USE – JAVAD GNSS modems are designed to be used by a professional. The user is expected to
have a good knowledge and understanding of the user and safety instructions before operating,
inspecting or adjusting.

COPYRIGHT – All information contained in this Manual is the intellectual property of, and
copyrighted material of JAVAD GNSS. All rights are reserved. You may not use, access, copy,
store, display, create derivative works of, sell, modify, publish, distribute, or allow any third party
access to, any graphics, content, information or data in this Manual without JAVAD GNSS’
express written consent and may only use such information for the care and operation of your
HPT102. The information and data in this Manual are a valuable asset of JAVAD GNSS and are
developed by the expenditure of considerable work, time and money, and are the result of original
selection, coordination and arrangement by JAVAD GNSS.

TRADEMARKS – HPT102™, TRIUMPH-1™, ModemVU™, JAVAD GNSS

®

are trademarks

or registered trademarks of JAVAD GNSS. Windows

®

is a registered trademark of Microsoft

Corporation; Product and company names mentioned herein may be trademarks of their
respective owners.

DISCLAIMER OF WARRANTY – EXCEPT FOR ANY WARRANTIES IN THIS MANUAL
OR A WARRANTY CARD ACCOMPANYING THE PRODUCT, THIS MANUAL AND THE
HPT102 MODEM ARE PROVIDED “AS-IS.” THERE ARE NO OTHER WARRANTIES.
JAVAD GNSS DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR USE OR PURPOSE. JAVAD GNSS AND ITS
DISTRIBUTORS SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR
OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL

«
...
5
6
7
8
9
...
»

Содержание HPT102















































Отзывы:

Нет отзывов

Похожие инструкции для HPT102

Бренд: A-Link Страницы: 8

Бренд: IBM Страницы: 82

Бренд: Paradyne Страницы: 2

COMSPHERE 3800PLUS

Бренд: Paradyne Страницы: 7

Бренд: Paradyne Страницы: 10

Бренд: Paradyne Страницы: 4

Бренд: Paradyne Страницы: 10

COMSPHERE 3800PLUS

Бренд: Paradyne Страницы: 12

Бренд: Paradyne Страницы: 26

Бренд: Paradyne Страницы: 20

Бренд: RACOM Страницы: 19

Бренд: Abocom Страницы: 42

Бренд: Linksys Страницы: 4

Бренд: iRZ Страницы: 19

Бренд: AIRIS Страницы: 26

Бренд: T-Home Страницы: 168

Бренд: Warwick Страницы: 17

Бренд: 3onedata Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды