Javad HPT102, Руководство оператора

Страница: 35 / 46

Command Line Interface
Diagnostics and Identification Commands
SLEEP
35
www.javad.com
3.4.4. SLEEP
The SLEEP command determines the sleep mode parameters. The sleeping HPT102 can be
activated by real-time CLK, DTR/RTS lines, and command received through TTL inputs. The
user can select one, two, or all three conditions.
SLEEP [Parameter Name] [Parameters List] [/?]
3.5. Diagnostics and Identification Commands
3.5.1. INFO
The INFO command is used to retrieve the Radio ID along with its Hardware version, the loaded
real-time software version/revision and BootLoader's version/revision.
INFO [Parameter Name] [Parameters List] [/?]
The INFO command without Parameter Name indicates all values:
HPT102 VHF Radio Modem, Javad GNSS
Parameter Name Parameter List
CLK 0 – Do not activate by internal real-time clock
(1 – 255) – Activate by internal real-time clock after 100 to 25500 msec of sleeping
HW 0 – Do not activate through DTR/RTS lines
1 – Activate through DTR/RTS lines
TTL 0 – Do not activate by external sense lines
1 – Activate by external sense lines
GTS 0 – Disable Sleep mode (default)
(1 – 255) – Go to sleep mode if there is no activity in 10 to 2550 msec
Parameter Name Parameter List
ID Product ID:
34 - HPT102
SN Six bytes Serial Number (SN)
HW 1.0 - hardware version in numeric “Major.Minor” format
SW Ver. 1.0 Rev. A - displays software's version in numeric “Major.Minor” format and
revision in numeric format (range from 01 to 99) for engineering releases and
alphabetic format (A to Z) for manufacturing releases
BL Ver. 1.0 Rev. A - displays BootLoader's version in numeric “Major.Minor” format
and revision in numeric format (range from 01 to 99) for engineering releases and
alphabetic format (A to Z) for manufacturing releases