Javad GISmore Скачать руководство пользователя | Manualshive

Страница: 7 / 50

background image

Preface

Regulatory Information

Canadian Emissions Labeling Requirements

7

www.javad.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause interference to radio or television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Move the equipment away from the receiver.
• Plug the equipment into an outlet on a circuit different from that to which the receiver is powered.
• Consult the dealer or an experienced radio/television technician for additional suggestions.

Note:

Any changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void your authority to operate such equipment.

Canadian Emissions Labeling Requirements

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel
brouilleur du Canada.

WEEE Directive

The following information is for EU-member states only: The use of the symbol indicates that this product
may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about the take-back and recycling
of this product, please contact your supplier where you purchased the product or consult.

«
...
5
6
7
8
9
...
»

Содержание GISmore



















































Отзывы:

Нет отзывов

Похожие инструкции для GISmore

Бренд: Icom Страницы: 26

Бренд: Jensen Страницы: 98

Бренд: Magnasonic Страницы: 2

Бренд: Magnat Audio Страницы: 64

Бренд: unicore Страницы: 7

Бренд: V2 Страницы: 16

AMG3787E-1-DR-1550-HP

Бренд: AMG Страницы: 12

Бренд: Blaupunkt Страницы: 2

Бренд: Leviton Страницы: 2

Бренд: Onkyo Страницы: 102

Бренд: Shadow Страницы: 6

Бренд: Q-Audio Страницы: 4

Бренд: Yaesu Страницы: 42

Бренд: X2 Digital Wireless Systems Страницы: 12

Бренд: Ten-Tec Страницы: 42

Rollixo Smart io

Бренд: SOMFY Страницы: 92

Бренд: Easy wave Страницы: 8

Бренд: Yaesu Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды