2
EN
2 IN 1 FLARING & SWAGING TOOL:
FLARING
01. Use a reamer to clean the tube. Insert tube
into the appropriate hole. Slide the Tube
Positioning Plate to the hole and make sure the
tube touches the Tube Positioning Plate lightly.
Then slide the Yoke to the top of the tube.
03. Flare the Copper Tube by turning the
Handle on top of the Yoke clockwise
until the Yoke can’t be tightened
anymore. It means the Flaring is done.
04. Turn the Handle on top of Yoke counter-
clockwise. Then release the side bar to
move the Yoke to the back. Open the
Bar to remove the flared tube.
02. Line up the Arrow Indicator on the
Yoke with the Indicator on the bar.
Then tighten the Side Bar on the Yoke.
NOTE:
After several uses clean the debris off the cone to ensure the smoothness of the cone. Also, use
lubricant at the thread to lubricate, and prevent rust for a longer lifespan.
Indicator
Arrow Indicator
Yoke
Tube
Positioning
Plate
Bar
Side Bar
Handle
Diamond
Flaring Cone
