JAVAC
Removing and Installing the Sensor | 12
074-710-P21-B JAVAC D-TEK 3 Operating Manual
1
4
/ 21
12 Removing and Installing the Sensor
D-TEK 3 uses a cartridge style sensor that is quick and easy to remove and replace in
the field. In addition to the standard sensor, JAVAC offers a CO
2
specific sensor for
use in refrigeration and air conditioning applications. See Replacement Parts and
Accessories [
}
23].
eject button
sensor release
tab
To replace the sensor:
1
Press the eject button on the back of D-TEK 3 and remove the battery door.
2
Grasp the sensor release tab and gently pull it out.
3
Align the new sensor with the rails.
4
Gently push the sensor along the rails until it is fully inserted.
ð
Do not force the sensor. If it does not slide freely, check the alignment and try
again.
5
Reinstall the battery door.
