Turn Off AC Output: Hold the AC button for approximately 2
seconds to turn off AC output. The corresponding indicator light
will turn off and “AC OFF” will be displayed on the display.
Note: When the power station is turned off, the AC Output will
be disabled. When the power station is turned on, AC output is
turned off by default. Please hold the power button to turn on
the power station and then hold the AC power button to turn on
the output.
LCD Display
The built-in LCD display indicates three important values:
Inputs
Shows the amount of power (Watts) going into the power station while
charging.
Outputs DC/ AC Shows the amount of power (Watts) and output your devices will be using
while plugged into the Jauch power station.
Battery Level
Shows 5 segments 20%, 40%, 60%, 80%, 100% capacity. As you use your
power station, segments will disappear from the display, indicating the
remaining charge. When charging the power station, you will notice a battery
segment blinking. This indicates the current charge status. One your power
station is fully charged; all battery segments will be lit and remain solid.
Note: The failure code (see page 9) will appear at on the right side of the screen where you
originally can see the Input, DC and AC power.
