21
NEC 3D, Seiko 1430 or 1440). To display 1024x768 non-interlaced
mode at 60Hz, the monitor must be capable
of synchronizing a 48.7KHz scan rate (e.g., Sony HG 1304, NEC
4D, 5D, Seiko 1450).
To display 1024x768 non-interlaced mode at 70Hz, the monitor
must be capable of synchronizing a 56.4KHz scan rate (e.g., NEC
4D).
Q:
Windows screen won’t come up, it kicks back to
DOS prompt. Why?
Explain and Suggestion:
Windows 3.1x™, or Windows for workgroup 3.1x™
The SYSTEM.INI file may contain different information with the
system hardware, cause by the new integration or the new
installation of a video adapter. The SYSTEM.INI file is located in
the WINODWS\SYSTEM directory. Use MS DOS editor to open
the file, and change the statement that is under [Boot description]
Section:
Display.drv= VGA then save changes, and restart Windows.
Or, Under
DOS prompt, type within Windows “SETUP”, change the display
selection to VGA then exit and restart Windows.
Windows 95™
Inadvertently, certain configuration files (e.g., msdos.sys,
command.com) have been changed in the system. Proceed to
correct that, is re-boot the system with a system (Windows’95)
formatted floppy diskette.
There are many reasons to causing the system booting-up with
un-appropriated steps. Base on Microsoft support wizard on their
WEBsite, there are many technical articles to help users with this
subject, such as troubleshooting with VXD errors, virus, Fatal
exceptions, etc., more details cover on each issue are descriptive
and familiar with, and exclusively further to our support.
Q:
System hangs-up after installing video driver.
Explain and Suggestion: