Jatheon PnC 6000, Инструкция по установке и администрированию

Страница: 9 / 52

Plug n Comply Installation Guide 9
Chassis Views
PnC 2000 / PnC 4000 / PnC 6000
Overview
There are several LEDs on the control panel as well as others on the drive
carriers to keep you constantly informed of the overall status of the system as
well as the activity and health of specific components. Most SC836 models are
two buttons on the chassis a control panel: a reset button and an on/off switch.
This chapter explains the meanings of all LED indicators and the appropriate
response you may need to take.
Control Panel Buttons
There are two push-buttons located on the front of the chassis. These are (in
order from left to right) a reset button and a power on/off button.
Reset: The reset button is used to reboot the system.
Power: The main power switch is used to apply or remove
power from the power supply to the server system. Turning
off system power with this button removes the main power
but keeps standby power supplied to the system. Therefore,
you must unplug system before servicing.