12
13
• Allow at least one meter around the heater with the object of
air can round with normality.
• Always place the heater in vertical position and stand it on a
firm solid horizontal base (not over carpets specially quilted
carpets).
• Do not fix the tip over switch. It is dangerous that the switch
get fixed, because in case of the appliance falling it would not
do its function.
• Do not rest the cable on hot parts of the appliance and avoid to
place it in the air output grid.
• This appliance incorporates a safety device which will
disconnect the resistance in case of overheating.
• The cleaning and maintenance done by users, can not be done
by children without any supervision.
• If the cable were to deteriorate it must be changed by an
Authorised Service Centre.
INSTRUCTIONS OF USE
• Plug the appliance into the mains.
• Turn the thermostat knob (3) clock-wise to the maximum position (MAX).
• Turn the power selector (1) to the desired position. The indicator light (2) will switch on and the fan heater
will start to work.
-
Position : The appliance will work as a fan and only give cold air.
-
Position “I”: Minimum heating power.
-
Position “II”: Maximum heating power.
-
Position “0”: Off.
• When the room reaches the desired temperature, turn the thermostat knob (3) anti-clock-wise until the pilot
light (2) goes off and the fan will go off. The thermostat will automatically maintain the selected temperature.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning ensure the appliance is unplugged.
• Allow to cool and clean with a soft dry cloth.
• It is important to keep the air intake and output grids clean of dust and fluff.
• Do not use chemical or abrasive products, such as metallic scourers, which may deteriorate the surfaces of
the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
