JASTEC uvim-W, Руководство пользователя

Страница: 17 / 18

Instruction for uvim-W use
1. Connect uvim-W to PC
•
Connect Wireless(WiFi or BT) or USB.
•
If you connect by USB, process below step.
•
Install a driver (Refer to pg 10) to find a uvim-W driver on PC
•
uvim-W will be identified as Jastec Virtual Comport (refer to pg 13).
2. uvim-W Setting
•
uvim-W will be set to connect to vehicle ECU through serial interface in CAN, K-line Protocol
3. Vehicle Communication
•
uvim-W setting & ECU Communication shall be operated as follows.
본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
16
ECU uVIM
PC App
Connect through CAN line, K-line
Connect with USB Cable
uvim-W Setting Request
uvim-W Setting Response
Send a request Vehicle data
Send a request vehicle data
in configured protocol
Receive a response vehicle data
Receive a response
vehicle data through
serial interface