Page 9 of 5
You can make the slider easier or harder to move. Use a 2.5
mm Allen wrench to turn the set screw clockwise to increase
the tension, counter-clockwise to decrease the tension.
Figure 21
. Turn the water on to the handshower.
2. Turn the thermostatic mixer handle until the output water
measures 00
o
on a thermometer. (See
Figure 22
.)
3. Turning the handle clockwise makes the water
cooler;turning the handle counter-clockwise makes the
water warmer.
4. Turn the water off.
5. Loosen the thermostatic mixer handle screw. Remove
the handle. (See
Figure 23
.)
6. Replace the handle so that the safety stop override but-
ton is at the 2:00 position. (See
Figure 24
.)
7. Tighten the set screw.
Figure 22
Figure 23
Figure 24
Adjust the Slider
Justify the Thermostatic Mixer Handle
Содержание SP200
Страница 2: ...Page of 15 Figure 1 Dimensions...
