© 2021 Jason® Hydrotherapy • 501.771.4477
Page 6 of 28
Customer Service : 800.255.5766
FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.)
FEATURES, CONTROLS AND OPERATING INSTRUCTIONS
INTRODUCTION
This manual contains all of the information needed for
the proper installation and operation for your Jason bath.
The bath has been designed to give you years of relaxing
trouble-free service, provided the unit is maintained and
operated in accordance with these instructions.
Thoroughly clean and disinfect the unit as described in
the CLEANING section of the
USER MAINTENANCE
INSTRUCTIONS
section of this owner’s manual before its
first use and periodically thereafter.
CAUTION:
Keep hair, towels and clothing away from any
installed suction fitting whenever the equipment is ON.
Never operate the equipment with the suction cover off,
doing so voids the manufacturer’s warranty—it is a safety
cover designed to eliminate the potential of hair and body
entrapment.
All Jason baths are pre-plumbed at the factory.
WARNING: Before operating, refer to the instructions
at the beginning of this owner’s manual pertaining to
the risk of fire, electric shock or injury to persons.
Filling and Draining
Close the drain and fill the bath with water to the desired
level (at least two (2) inches (50mm) above the jet). The
inlet temperature should not exceed 104°F (40°C). When
bath is in use, turn the unit OFF before draining the water.
The bath unit and its plumbing are designed to drain after
each use whether used as a hydrotherapy bath, soaking
bath, or just taking a shower.
NOTE:
If the unit fails to operate, check the breaker panel
to ensure that the circuit breaker is on. Check the GFCI by
testing and resetting it. If the unit still fails to operate, refer
to the Trouble Shooting Guide section of this manual. If the
unit still fails to operate and is out of warranty, contact an
authorized service technician for repair. If the unit is within
the warranty period, contact JASON Technical Services
at 800-255-5766.
DO NOT ATTEMPT TO RESOLVE THE
PROBLEM.
FEATURES
Jason offers the finest in soaking hydrotherapy baths but
also offers the option for more hydrotherapy choices with
Jason MicroSilk
®
or AirMasseur
®
therapy units. Please
consult your product configuration label on the front of this
manual to learn what hydrotherapy experiences await you.
MICROSILK
®
FEATURES
Jason’s MicroSilk hydrotherapy bath supersaturates the
water with negatively charged, oxygen-rich microbubbles
which gives your skin new life. This results in increased
oxygen levels which promotes healthy skin cell growth,
neutralizes free radicals and encourages healing of scar
tissue formation.
MicroSilk
®
Unit
The MicroSilk unit generates the oxygen-rich microbubbles
that fill the bath. MicroSilk units provided on Jason baths
are factory tested after installation on the bath.
MicroSilk
®
Port
A strategically placed MicroSilk port is provided for com-
plete enjoyment of your bath. The port can also be used to
connect an optional MicroSilk Shower Wand.
Standard Edition MicroSilk
®
The Jason Standard Edition MicroSilk hydrotherapy
includes the Microbubble Generator unit, an electronic
control and a 20-minute timer.
Premier Edition MicroSilk
®
The Jason Premier Edition MicroSilk hydrotherapy pro-
vides all the features of the Standard Edition with the
included benefits of a digital control with LCD-display
readout, an LED Chromatherapy mood light, enhanced
user control options and an Automatic Ozone Sanitation
system.
Signature Edition MicroSilk
®
The Jason Signature Edition MicroSilk hydrotherapy pro-
vides all the benefits of the Premier Edition as well as low
water/temperature sensors and Jason’s Bluetooth Sound
Immersion system.
