Page 4 of 5
uSER MaINTENaNCE INSTRuCTIONS
humIdITy
Warning: avoid high humidity levels in your home. Mold, mildew,
fungi, and bacteria which may be harmful to health thrive in areas with
continued high humidity levels; therefore, every precaution should
be taken to make sure your plumbing fixtures including bathtubs,
therapy baths, or showers do not become a source of high humidity
due to improper installations or leaks.
To avoid having your plumbing fixtures become a source of
unwanted humidity, please make sure the following steps
are taken prior to installation.
. Make sure the area where the bathtub or shower is
installed is well vented and allows enough ventilation and
air circulation to dry the bathroom environment within a
short time after taking a bath or shower.
2. If your bath or shower unit is tiled-in, use units with an
integral tile flange or make sure a tile flange kit or a similar
mechanical barrier is installed to prevent shower spray,
splash, or overflow to leak behind the bathtub.
3. Make sure the plumber properly tests your therapy bath
before it is roughed in to make sure there are no leaks
and it is installed with proper access to bath equipment.
4. Make sure that all the plumbing and fixtures in the bathroom
are in good working order and have no leaks.
5. Do not use carpeting or other materials or furniture, which
can hold moisture, in your bathroom.
6. Use disinfectant to clean any bathroom surfaces, which
are regularly exposed to moisture.
7. Clean and disinfect humidifier and dehumidifiers as
recommended by the manufacturer. Replace the air filter
on the HVAC unit once a month.
8. Clean moldy surfaces as soon as any mold appears by using
a detergent/soapy solution and appropriate household
cleaner. Always use gloves during cleaning. Dispose of
any sponges or rags used to clean mold.
CLEANING and SuRFACE mAINTENANCE
The Carrera™ Composite solid surface is nonporous. Stains,
mold, mildew, or bacteria cannot penetrate the surface.
When frequently cleaned, the Carrera™ Composite solid
surface will maintain its original beauty and resist any signs
of wear and aging for years to come. Since the Carrera™
Composite solid surface is homogeneous and evenly solid,
surface damage can be easily removed by using extra fine
abrasive paper and cleaning with traditional abrasive deter-
gents.
For most dirt and residue, use soapy water or ammonia cleaner;
rinse and wipe dry. For the occasional stubborn residue, use
a cleaner like Clorox Soft Scrub and a 3M Scotch Brite pad
(green) to remove the residue.
Occasional disinfecting can be preformed by wiping the sur-
face with diluted household bleach ( part water and part
bleach). Rinse the surface with water and wipe dry. When
using a bleach solution, care must be taken not to get any in
your eyes or on bare skin. You should always wear gloves
and eye protection when working with bleach.
The Carrera™ Composite solid surface should not be exposed
to strong chemicals, such as, paint remover, oven cleaners,
hydrochloric acid, sodium hydroxide, chloride solvents (tri-
chloroethylene) or any strong acids or bases.
REPAIR
Refer all plumbing or surface repair to a qualified service
technician. Remember when contacting your dealer or service
representative to always have your serial number, proof of
purchase, and model number. This will ensure a quick re-
sponse on warranty items. The serial number can be found
on the label adhered to the bath.
PlEaSE NOTE: all WaRRaNTy REPaIRS MuST BE
auTHORIzED By THE MaNuFaCTuRER BEFORE WORk IS
STaRTED.
Содержание Carrera CB553P
Страница 3: ...Page of 5 Figure 2 Figure 2 A ...
