JASON Hydrotherapy AirMasseur, Руководство пользователя

Страница: 9 / 25

Jason International, Inc. • 501.771.4477
Page 9 of 25
Customer Service : 800.255.5766
Copyright © 2018 Jason International, Inc.
FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.)
AirMasseur
®
Icon MicroSilk
®
Icon
Blower Speed Icon
The AIRMASSEUR icon is used to activate the
blower and the 20-minute timer.
•
CONSTANT Mode will start with the first press and
the icon will turn BLUE.
• WAVE Mode will start with the next press, indicated
by a slow flash of the icon.
• PULSE Mode will start with the next press, indi-
cated by a rapid flash of the icon.
• Pressing the icon again will shut the blower OFF
and the icon will turn WHITE.
• Starting the AirMasseur will turn OFF any other
therapy equipment running at that time.
• Once the system returns to Standby mode, the icon
will flash GREEN to indicate a purge countdown.
After twenty (20) minutes the blower will turn on
for two (2) minutes to allow the plumbing lines to
drain. This will be indicated by the AIRMASSEUR
icon turning solid GREEN. This purge cycle can be
canceled by pressing and holding the power button
for five (5) seconds.
The MICROSILK icon is used to activate the
MicroSilk unit and the 20-minute timer.
•
Once pressed, the microbubble generator will start
and the icon will turn BLUE.
• Pressing the icon again will shut the unit OFF and
the icon will turn WHITE.
• Starting the MicroSilk unit will turn OFF any other
therapy equipment running at that time.
The SPEED icon is used to increase or de-
crease the blower speed once the blower is ON.
•
Press and hold the icon to decrease the blower
speed until the desired intensity is reached, then
release.
• Press and hold the icon again to increase the
blower speed until the desired intensity is reached.
• The POWER icon will flash red once the high or
low speed limit has been reached.
• The blower will return to the highest speed on any
mode change.