Jason International, Inc. •
501.771.4477
Page 15 of 26
Customer Service : 800.255.5766
Copyright © 2014 Jason International, Inc.
Figure 18
sTanDarD eDITIOn MICrOsIlK
®
Jason’s Standard Edition MicroSilk
®
system features the
best in luxury bathing for the leisure bath industry. To
assure that your bath functions properly, the MicroSilk
®
pump
control box must be properly connected.
NOTE: For 120V systems, the power cord for the
MicroSilk
®
control box must be plugged into a 120V,
20 amp, GFCI dedicated circuit.
mICROSILK
®
CONTROL bOx CONNeCTIONS
NOTe:
This diagram also applies to 50 Hz, 240V pumps, controls,
and power supply systems. Except that the MicroSilk
®
Pump
junction boxes must be connected into one dedicated 240V, 20
amp, GFCI circuit.
IMC-263
To Dedicated
120V / 60Hz 20A
GFCI Protected Service
MS Standard 2014
A
B
C
C
MS
Pump
Keypad
Control Box
INSTALLATION INSTRUCTIONS (cont.)
The MicroSilk
®
Control Box
The MicroSilk
®
unit and keypad must be plugged into the
proper receptacles for correct operation of the MicroSilk
®
system. See Figure 18 for connections:
(A) The power cord for the MicroSilk
®
control box must be
connected into the proper GFCI dedicated circuit for the
system (see note).
(B) The MicroSilk
®
pump’s power cord will need to be plugged
into the control box Refer to the ELECTRICAL section of
this manual for connecting the pump to the control box.
(C) Eight-pin mini-DIN terminal for the MicroSilk
®
Keypad.
