Jasic MIG 350 Pulse Separate, Руководство оператора

Страница: 5 / 35

WWW.JASIC.CO.UK 5
RF Declaration
Equipment that complies with directive
2004/108/EC concerning electromagnetic
compatibility (EMC) and the technical
requirements of EN60974-10 is designed for use
in industrial buildings and not those for domestic
use where electricity is provided via the low
voltage public distribution system. Difficulties may
arise in assuring class A electromagnetic
compatibility for systems installed in domestic
locations due to conducted and radiated
emissions.
In the case of electromagnetic problems, it is the
responsibility of the user to resolve the situation.
It may be necessary to shield the equipment and
fit suitable filters on the mains supply.
LF Declaration
Consult the data plate on the equipment for the
power supply requirements.
Due to the elevated absorbance of the primary
current from the power supply network, high
power systems affect the quality of power
provided
by the network. Consequently,
connection restrictions or maximum impedance
requirements permitted by the network at the
public network connection point must be applied
to these systems.
In this case the installer or the user is responsible
for ensuring the equipment can be connected,
consulting the electricity provider if necessary.
Materials and their disposal
The equipment is manufactured with materials,
which do not contain any toxic or poisonous
materials dangerous to the operator.
When the equipment is scrapped, it should be
dismantled separating components according to
the type of materials.
Do not dispose of the equipment with normal
waste. The European Directive 2002/96/EC on
Waste Electrical and Electronic Equipment states
the electrical equipment that has reached its end
of life must be collected separately and returned
to an environmentally compatible recycling
facility.
Handling of Compressed gas cylinders and
regulators
All cylinders and pressure regulators used in
welding operations should be handled with care.
Never allow the electrode, electrode holder or
any other electrically “hot” parts to touch a
cylinder.
Keep your head and face away from the cylinder
valve outlet when opening the cylinder valve.
Always secure the cylinder safely
Never deface or alter any cylinder