Jasic MIG 350 Pulse Separate, Руководство оператора

Страница: 14 / 35

WWW.JASIC.CO.UK 14
This area contains components such as process parameters LED and right direction selecting key. Process
parameters include pre parameters (such as pre-flow time), initial parameters (such as speed, current and
voltage), upslope parameters (such as time and pitch ratio), peak parameters (such as time, current,
speed, thickness, arc characteristic, voltage, proportion and frequency), base parameters (such as
current, speed and voltage), downslope parameters (such as time and pitch ratio), crater parameters
(current, speed and voltage) and post parameters (such as post-flow time). Users can select the desired
process parameters by pressing the selecting key, and the corresponding LED will be on when a certain
segment is selected. In some cases to select the parameters to be ultimately displayed or adjusted, users
may need to make a second choice through the current column or voltage column.
Current column parameters selecting zone
9 Current
10 Wire feed speed
11 Base metal thickness
12 Arc characteristic
This area contains components such as current column
parameters display meter, LEDs and selecting key. The
current column parameters include 4 parameters, namely
current (A), wire feed speed (m/min), thickness of base
metal (mm) and arc characteristic (-/+). Current column
parameters display meter can display system information,
actual welding current and the contents of the column parameters. Users can select the desired
parameters by pressing the selecting key, and the corresponding LED will be on when a certain parameter
is selected. Meanwhile, the contents of the selected parameter will be displayed on the meter.
Note: The meter will display the actual current when there is welding current output. To modify a
parameter, users should make corresponding LED flash by pressing the selecting key.
Voltage column parameters selecting zone
13 Voltage
14 Time
15 Pulse duration ratio
16 Frequency
It contains components such as voltage column parameters
display meter, LEDs and selecting key. The voltage column
parameters include 4 parameters, namely voltage (V), time
(s), proportion (%) and frequency (Hz). Voltage column
parameters display meter can display system information,